Volume 15, Issue 4 (3-2023)
ijhe 2023, 15(4): 671-690 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mardiroosi A, Fakhri H, Esrafili A, Hasham Firooz M, Farzadkia M. Efficiency of photocatalytic removal of amoxicillin from aqueous solutions using the sandwich structure of nanoporous coordination polymer-metal oxide. ijhe 2023; 15 (4) :671-690
URL: http://ijhe.tums.ac.ir/article-1-6731-en.html
URL: http://ijhe.tums.ac.ir/article-1-6731-en.html
Anasheh Mardiroosi1 
, Hanieh Fakhri2 , Ali Esrafili3 , Masoumeh Hasham Firooz4 , Mahdi Farzadkia * 5
, Hanieh Fakhri2 , Ali Esrafili3 , Masoumeh Hasham Firooz4 , Mahdi Farzadkia * 5
1- Department of Chemistry, Tarbiat Modares University, Tehran, Iran
2- Research Center for Environmental Health Technology (RCEHT), Iran University of Medical Sciences, Tehran, Iran
3- Research Center for Environmental Health Technology (RCEHT), Iran University of Medical Sciences, Tehran, Iran AND Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran
4- Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
5- Research Center for Environmental Health Technology (RCEHT), Iran University of Medical Sciences, Tehran, Iran AND Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran ,farzakia.m@iums.ac.ir
2- Research Center for Environmental Health Technology (RCEHT), Iran University of Medical Sciences, Tehran, Iran
3- Research Center for Environmental Health Technology (RCEHT), Iran University of Medical Sciences, Tehran, Iran AND Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran
4- Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
5- Research Center for Environmental Health Technology (RCEHT), Iran University of Medical Sciences, Tehran, Iran AND Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran ,
Abstract: (655 Views)
Background and Objective: Pharmaceutical compounds can cause potential risks to aquatic and terrestrial organisms. So far, different methods have been used to eliminate these pollutants, photocatalytic processes are one of the most efficient processes to eliminate pharmaceutical compounds. In this study, the efficiency of a novel MOF-based nanocomposite, PMo/UiO-66 as a photocatalyst for amoxicillin degradation under visible light irradiation was evaluated.
Materials and Methods: The study of the chemical decomposition of amoxicillin using the PMo/UiO-66 system was conducted at different stages. First, the PMo/UiO-66 MOF nanocomposite was synthesized using the solvothermal method, then the properties of the synthesized nanocomposite were investigated using XRD, FTIR, and SEM techniques. The effect of different operational parameters such as pH (3, 6, and 9), catalyst concentration (15, 20, 25, and 30 %w/w), initial concentrations of amoxicillin (20, 30, 40, and 50 mg/L) at different times on the removal efficiency was investigated. The reusability of the catalyst for four cycles was assessed.
Results: The results showed that PMo/UiO-66 nanocomposite at pH 6, 25 %w/w nanocomposite concentration, and the amoxicillin concentration of 20 mg/L led to complete decomposition of amoxicillin after 120 min. The kinetic of amoxicillin removal followed the first-order model. Reusability tests showed that the photocatalytic efficiency of the synthesized catalyst was not substantially reduced after four cycles.
Conclusion: The current study confirmed that the PMo/UiO-66 system has an appropriate efficiency for photocatalytic removal of amoxicillin under optimized test conditions.
Materials and Methods: The study of the chemical decomposition of amoxicillin using the PMo/UiO-66 system was conducted at different stages. First, the PMo/UiO-66 MOF nanocomposite was synthesized using the solvothermal method, then the properties of the synthesized nanocomposite were investigated using XRD, FTIR, and SEM techniques. The effect of different operational parameters such as pH (3, 6, and 9), catalyst concentration (15, 20, 25, and 30 %w/w), initial concentrations of amoxicillin (20, 30, 40, and 50 mg/L) at different times on the removal efficiency was investigated. The reusability of the catalyst for four cycles was assessed.
Results: The results showed that PMo/UiO-66 nanocomposite at pH 6, 25 %w/w nanocomposite concentration, and the amoxicillin concentration of 20 mg/L led to complete decomposition of amoxicillin after 120 min. The kinetic of amoxicillin removal followed the first-order model. Reusability tests showed that the photocatalytic efficiency of the synthesized catalyst was not substantially reduced after four cycles.
Conclusion: The current study confirmed that the PMo/UiO-66 system has an appropriate efficiency for photocatalytic removal of amoxicillin under optimized test conditions.
Keywords: Amoxicillin, Advanced oxidation process, Photocatalyst, Nanoporous coordination polymer-metal oxide
Type of Study: Research |
Subject:
wastewater
Received: 2022/12/6 | Accepted: 2023/02/20 | Published: 2023/03/15
Received: 2022/12/6 | Accepted: 2023/02/20 | Published: 2023/03/15
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
