Showing 11 results for Esrafili
S Jorfi, R Rezaei Kalantary, A Mohseni Bandpi, N Jaafarzadeh Haghighifard, A Esrafili, L Alaei,
Volume 4, Issue 1 (24 2011)
Abstract
Background and Objectives: Fluoride is widely used in industries such as manufacture of semiconductors, power plants, glass production etc and release to the environment via their effluents. The purpose of this sturdy was to compare the efficiency of low price adsorbents in fluoride removal from water.
Materials and Methods: The optimum values of pH, contact time and adsorbent dosage were determined and different concentrations of fluoride were experimented in lab scale conditions for bagasse, modified bagasse and chitosan. Then Langmuir and Freundlich coefficient were determined based on optimum conditions.
Results: The pH value of 7, contact time of 60 min and adsorbent dosage of 2 g/L were determined as optimum conditions for all three adsorbents. The most fluoride removal efficiency of 91% was obtained for modified bagasse in optimum conditions.
Conclusion: Based on data obtained in this study, it can be concluded that adsorption by modified bagasse is an efficient and reliable method for fluoride removal from liquid solutions.
Majid Kermani, Mitra Gholami, Abdolmajid Gholizade, Mahdi Farzadkia, Ali Esrafili,
Volume 5, Issue 1 (6 2012)
Abstract
MicrosoftInternetExplorer4
Background and Objectives: Phenols in trace quantities are usually present in the treated
effluent of many wastewater-treatment plants. Phenol compounds even at low
concentration can cause toxicity, health and significant taste and odor problem
in drinking waters. This research focuses on understanding the sorption process
and developing a cost-effective technology for the treatment of water
contaminated with phenolic compounds, which are discharged into the aquatic
environment from a variety of sources. In order to remove phenolic compounds
from water, a new natural sorbent, rice husk ash, was developed.
Materials and Methods: Removal of phenol, 2-chlorophenol and 4-chlorophenol were characterized by
spectrophotometric technique at wavelengths of 269.5, 274 and 280 nm,
respectively, under batch equilibrium conditions and via changing the
parameters of contact time, initial pH, and initial concentration of adsorbates
and dosages of sorbent. Finally, the results were analyzed by the kinetic and
isotherm models.
Results: in this
study, the equilibrium time was found to be 240 min for full equilibration of
adsorbates. Removal percent of 2-chlorophenol was lower than two others. The
maximum removal of phenol, 2-CP and 4-CP was observed at an initial pH of 5.
The percentage removal of these phenolic compounds increased with increasing
adsorbent dose and decreasing initial concentration. In kinetics studies,
correlation coefficient and ARE factor showed that the sorption of phenol
(R2=0.9999), 2-chlorophenol (R
2=0.9992) and 4-chlorophenol (R
2=1)
fitted by pseudo second order model. Isotherm studies also revealed that,
Langmuirmodel for phenol (R
2=0.9499), Freundlich model for
2-chlorophenol (R
2=0.9659) and 4-chlorophenol (R
2=0.9542)
were the best choices to describe the sorption behaviors.
Conclusion: Sorption
process is highly dependent on the pH and it affects adsorbent surface
characteristics, the degree of ionization and removal efficiency. At high pH
hydroxide ions (OH-)
compete for adsorption sites with phenol molecules. The sorption was done
rapidly and a plateau was reached
indicating the sorption sites occuupied till
they were saturated. Since the increasing sorbent dose would improve
sorption site, its increasing enhances phenolic compounds removal.
!mso]>
ject classid="clsid:38481807-CA0E-42D2-BF39-B33AF135CC4D" id=ieooui>
Emad Dehghani Fard, Ahmad Jonidi Jafari, Roshanak Rezae Kalantari, Mitra Gholami, Ali Esrafili,
Volume 5, Issue 2 (13 2012)
Abstract
MicrosoftInternetExplorer4
Background and Objectives: Aniline has been used in different processes of chemical
industries, however due to its side effects on the environment, several methods
have been considered for its removal. In this study, we evaluated the
performance of photocatalytic process using ZnO nanoparticles (nZnO) and
ultraviolet (UV) irradiation for removal of Aniline from a synthetic effluent.
Materials and Methods: A 5L photocatalytic reactor made from Plexiglas, which the UV lamp (20w)
installed in the center of that (inside a quartz jacket), was designed and nZnO
(0.2-0.5 g/l) was being added into synthetic effluent with Aniline concentration
of 250 ppm. After retention times of 30, 60, and 90 min, samples were
centrifuged and supernatant was filtered using a 0.2 µ PTFE filter. The
liquid-liquid method and Gas Chromatography instrument was used for extraction
and analysis respectively.
Results: Results
showed that the photocatalytic process of nZnO+UV could effectively remove
Aniline from effluent. Increasing trend in the removal efficiency of Aniline
using nZnO = 0.5 g/l was slower in comparison with other nZnO concentrations
and the ANOVA analysis shows no significant difference between removal
efficiency of Aniline in different concentrations of nZnO. The most removal
efficiency of Aniline (76.3%) was observed in alkaline pH, retention time of 90
min and nZnO of 0.5 g/l.
Conclusion: It could be concluded that the
photocatalytic process of nZnO+UV could be suitable technique for Aniline
removal from effluents.
Omol Banin Naeej, Anoushiravan Mohseni Bandpi, Ahmad Jonidi Jafari, Ali Esrafili, Roshanak Rezaei Kalantary,
Volume 5, Issue 3 (21 2012)
Abstract
MicrosoftInternetExplorer4
Background and Objectives: Nitrate is one of the most groundwater pollutants in world.
Reduction of nitrate to nitrite by microorganisms cause serious health hazards.
Nitrate can be eliminated using either adsorbtion or reduction. In this study,
we investigated the adsorption of nitate on zeolite and the feasibility of
removal improvement using supported zero
valent nano iron on zeolite via the reduction process.
Materials and Methods: The study was done in two phases investigation the
zeolite and modified zeolite with zero valent nano iron in nitrate removal from
water. First, we determined the optimum pH and time then the effect of
adsorbent and nitrate concentration was investigated in one factor at the time.
The adsorption isotherm was calculated according to the optimum condition. The
physical characteristics of adsorbents were determined using SEM and TEM.
Results: The morphology investigation of adsorbent showed that the
particle size of supported zero valent nano iron on zeolite was approximately
30-50 nm in diameter. The best conditions were pH 5, contact time of 120 min
and 15 g/L for zeolite, while pH 3, contact time of 50 min and 7.5 g/L for
supported zero valent nano iron on
zeolite. The isotherm equations revealed that nitrate adsorption follows
Langmiur in both cases.
Conclusion: The supported zero
valent nano iron on zeolite could be considered as a high potential adsorbent
for nitrate because it has several adsorbent sites, and Fe
0 as a
function for nitrate reduction.
Masoumeh Golshan, Simin Nasseri, Mahdi Farzadkia, Ali Esrafili, Roshanak Rezaei Kalantary, Leila Karimi Takanlu,
Volume 7, Issue 2 (10-2014)
Abstract
Background and Objectives: The use of surfactants enhance the bioavailability of nonbiodegradable contaminants such as PAHs. Biosurfactants are more environmental friendly. In this study the ability of removing phenenthrene from soil by biosurfactant was assessed and compared with that of chemical surfactant. Materials and Methods: A soil sample free of any organic or microbial contamination was artificially spiked with phenanthrene at two concentrations. Then, mineral salt medium at constant concentration of chemical surfactant TritonX-100 and rhamnolipid MR01biosurfactant was added to it in order to have the proportion of 10% w:v (soil:water). A microbial consortium with a potential of phenanthrene biodegradation was inoculated to the soil slurry in two densities (OD=1 and 2) and then it was aerated on a shaker. After eight weeks, the residual concentration of phenanthrene in the soil was extracted by ultrasonic and was analyzed using HPLC. MPN test was used for measuring microbial population. This study was conducted based on the two level full factorial design of experiment. Results: It was found that chemical surfactant exhibited higher PHE removal efficiency than the biosurfactant. Using 120 mg/L of TritonX-100 and rhamnolipid, the PHE removal for the soil contaminated with 50 mg PHE/kg dry soil was 98.5 and 88.7% respectively, while the removal efficieny was decreased to 87 and 76% respectively for the soil contaminated with 300 mg PHE/kg. In the absence of surfactant, the removal efficiency at concentrations of 50 and 300 mg PHE/kg dry soil was achieved 60.76 and 51% respectively. The phenanthrene removal efficiency in OD=2 was more higher than OD=1. In the presence of rhamnolipid, the maximum microbial populations was observed in the second week, while it decreased in the presence of TritonX-100. Conclusion: Use of biosurfactants can be considered as a suitable option in low level pollutant sites. Chemical surfactants as ex-situ has achieved more satisfactory results in high level contaminant sites.
E. Karimi Pasandideh, R. Rezaei Kalantary, S. Nasseri, A. H. Mahvi, R. Nabizadeh, A. Esrafili,
Volume 7, Issue 3 (5-2014)
Abstract
Background and Objective: The presence of natural organic materials (NOM) in water resources affects its quality (i.e. color, odor, and taste). In addition, it leads to the fouling of filters and membranes and reduces water treatment efficiency during flocculation/ coagulation. Moreover, NOM reacts with disinfectants and produces byproducts (DBPs), which are harmful to human health. Magnetic nanoparticles have been reported as effective adsorbents for the removal of pollutants from the aqueous media. In this study, we applied SiO2coating on these nanoparticles in order to enhance their stability and dispersion in aqueous media and investigated their capability in NOM adsorption from water. Materials and Methods: Iron oxide magnetic nanoparticles were prepared by co-precipitation. Then, we added Tetraethoxysilane (TEOS) to the solution in order to coat it with SiO2 . The adsorbent characteristics were determined by SEM and XRD. Then, we carried out the adsorption experiments under different pH(3-12) and contact time (5-240 min)performance conditions. The adsorption kinetic was determined with respect to different Humic acid adsorption times. Later, we determined the effect of different concentrations of adsorbent on different concentrations of Humic acid, and Langmuir and Freundlich coefficients based on the optimum conditions. Results: The morphology investigation of adsorbent showed the average size of Fe3O4/SiO2nanoparticles was 30-130 nm. The pH value of 10.5 and the contact time of 90 min at room temperature were determined as optimum conditions for removal of humic acid using Fe3O4/SiO2 nanoparticles. The maximum adsorption capacity of Fe3O4/SiO2 was192.30. The adsorption isotherm was fitted well by Langmuir model (R2>0.90) and the pseudo-second order model (R2>0.98) could better explain humic acid adsorption. Conclusion: Having high number of active surface sites, magnetic properties, easily separation using magnetic field, and its cost-effectiveness, the Fe3O4/SiO2 nanoparticles could be used as an efficient adsorbent in removal of humic acid from water.
Z Akbari Jonoush, M Farzadkia, S Naseri, H.r Mohajerani, A Esrafili Dizaji, Y Dadban Shahamat,
Volume 7, Issue 4 (1-2015)
Abstract
Background and Objectives: Increased growing nuclear industry has increased the researchers concerns on uranium presence in the environment and its effects on human health. Uranium is a dangerous radioactive heavy metal with high half-life and chemical toxicity. Therefore, the main objective of this study was to removal uranium (VI) from aqueous solution by uranium benzamide complex using AC_Fe3O4 nanocomposite. Materials and Methods: AC_Fe3O4 nanocomposite was synthesized using co-precipitation method. The experiments were designed as one factor at the time method. The optimum range of pH, contact time, amounts of adsorbent, and concentration of benzamide were determined. Then, kinetic and isotherm of uranium adsorption were studied. In addition, the properties of this adsorbent were characterized using scanning electron microscopy (SEM) and Fourier transform infrared (FTIR). Results: The SEM and FTIR analysis confirmed that activated carbon is coated with Fe3O4 nanoparticles and the magnetic property of AC-Fe2O3 was approved. According to the results, the optimum conditions were pH =6, contact time =30 min, and 0.06 g of adsorbent dose. The adsorption of uranium on the AC_Fe3O4 nanocomposite fitted to Langmuir isotherm and pseudo-second order kinetic model. The removal of U(VI) was increased about 6% with increasing in benzamide concentration to 50 mg/L. The best percentage removal of uranium in aqueous solution was 95%. Conclusion: The removal of U(VI) on AC_Fe3O4 nanocomposite with the aid of benzamide is a rapid and highly pH depended process. The maximum sorption capacity (15/87 mg/g) of AC_Fe3O4 nanocomposite shows that this method is a suitable method for Uranium removal.
M Kermani, M Farzadkia, A Esrafili, Y Dadban Shahamat, S Fallah Jokandan,
Volume 10, Issue 2 (9-2017)
Abstract
Background and Objective: Discharge of industrial wastewater containing Catechol has adverse effects on human and environmental health. Purpose of this study was to determine the effects of catechol toxicity before and after advanced oxidation process (ozonation process) by bioassay test with Daphnia Magna.
Materials and Methods: This study is an applied research in which the toxicity of catechol was determined by Daphnia Magna bioassay test during the ozonation process. First, Catechol stock solution was prepared at a concentration of 250 mg/L. Then, 10 samples were prepared that each contained 0 (control), 0.5, 1, 3, 6, 12, 25, 50, 75 and 100% of volume of primary solution. Initial samples were prepared from reactor effluent in the same volume as those of the samples. According to standard method, 10 Daphnia infants were added to each sample. The samples were observed after 24, 48, 72 and 96 hours. Finally, lethal concentration (LC50) and toxicity unit (TU) were calculated using Probit analysis.
Results: According to the results, Daphnia magna was affected by the toxicity of catechol. LC50 (24-hour) for raw effluent was increased from 13.30 mL/100 mL to 30.4 mL/100 mL after 60 minutes Treatment. The toxicity unit was decreased from 7.51 TU to 3.29 TU accordingly, showing reduction of 56% in toxicity. The toxicity of the treated effluent decreased during ozonation process of catechol.
Conclusion: Based on the bioassay test, ozonation process was able to reduce the toxicity of catechol. Therefore, this process can be used as an option to treat wastewater that contains catechol.
S Fallah Jokandan, M Yegane Badi, A Esrafili, A Azari, E Ahmadi, H Tarhandeh, M Kermani,
Volume 12, Issue 2 (9-2019)
Abstract
Background and Objective: The activities of various industries produce a wide range of pollutants and toxic compounds. One of these compounds is the catechol, a cyclic organic compound with high toxicity and resistant to degradation. Therefore, the purpose of this study was to investigate efficiency of powder activated carbon magnetized with Fe3O4 nanoparticles in the removal of catechol from aqueous solutions by response surface methodology.
Materials and Methods: The co-precipitation method was used to synthesize magnetic powder activated carbon and its properties were analyzed by SEM and XRD analysis. Then, the effect of the parameters such as pH, contact time, absorbent dose, initial concentration of catechol and temperature on the efficiency of adsorption process were investigated using a response surface methodology (Box–Behnken). The residual concentration of catechol was measured by HPLC at 275 nm.
Results: The results showed that the maximum efficiency of the adsorption process was obtained at concentration of 20 mg/L, pH=3, contact time 90 minutes, at 25 °C and absorbent dose of 1.5 g/L. The study of isotherm and kinetics showed that the experimental data of the catechol adsorption process correlated with the Langmuir and pseudo-second order models, respectively. Thermodynamic study of the reaction also expresses the Exothermic and Spontaneous process.
Conclusion: The results showed that the adsorption process using powder activated carbon magnetized with Fe3O4 nanoparticles at acidic pH had better efficiency. As a result, the studied process as an effective, rapid and inexpensive method for removal of catechol from aqueous solutions is proposed. Due to its short reaction time, it is economically affordable process.
H Niknejad, M Farzadkia, A Esrafili, M Kermani,
Volume 12, Issue 4 (2-2020)
Abstract
Background and Objective: 2,4 dinitrophenol is observed in sewage produced from chemical and petrochemical industries. Contamination of drinking water with these pollutants causes toxicity, health problems and change in taste and odor. The present study was developed to evaluate the efficiency of removal 2,4-DNP through dried sludge adsorbent and modified calcium chloride sludge adsorbent.
Materials and Methods: At first, sludge was dried at temperature of 60 °C. Next, CaCl2 was used to improve adsorption capacity. The removal efficiency of 2,4 dinitrophenol were determined by HPLC at wavelength of 360 nm. The effects of influencing factors including pH, initial pollutant concentration, contact time, and adsorbent dose were examined.
Results: The optimum pH of adsorption for both adsorbents was found to be 7. The optimum concentration of 2,4-DNP was 10 ppm. The results obtained from the present research showed that the removal of the contaminant using dried and modified sludge sorbent was increased from 72.6% to 86% at a dosage of 1.5 g. The adsorption kinetics were fitted with the pseudo second order kinetics model for both adsorbents. The isotherm data also showed that the adsorption of this pollutant on both adsorbents is fitted with the Freundlich model.
Conclusion: Results obtained from the present study indicated that the efficiency of the modified sludge ash is more than the non-modified sludge in 2,4 dinitrophenol removal. This can reduce adsorbent consumption in industrial treatment plants.
Anasheh Mardiroosi, Hanieh Fakhri, Ali Esrafili, Masoumeh Hasham Firooz, Mahdi Farzadkia,
Volume 15, Issue 4 (3-2023)
Abstract
Background and Objective: Pharmaceutical compounds can cause potential risks to aquatic and terrestrial organisms. So far, different methods have been used to eliminate these pollutants, photocatalytic processes are one of the most efficient processes to eliminate pharmaceutical compounds. In this study, the efficiency of a novel MOF-based nanocomposite, PMo/UiO-66 as a photocatalyst for amoxicillin degradation under visible light irradiation was evaluated.
Materials and Methods: The study of the chemical decomposition of amoxicillin using the PMo/UiO-66 system was conducted at different stages. First, the PMo/UiO-66 MOF nanocomposite was synthesized using the solvothermal method, then the properties of the synthesized nanocomposite were investigated using XRD, FTIR, and SEM techniques. The effect of different operational parameters such as pH (3, 6, and 9), catalyst concentration (15, 20, 25, and 30 %w/w), initial concentrations of amoxicillin (20, 30, 40, and 50 mg/L) at different times on the removal efficiency was investigated. The reusability of the catalyst for four cycles was assessed.
Results: The results showed that PMo/UiO-66 nanocomposite at pH 6, 25 %w/w nanocomposite concentration, and the amoxicillin concentration of 20 mg/L led to complete decomposition of amoxicillin after 120 min. The kinetic of amoxicillin removal followed the first-order model. Reusability tests showed that the photocatalytic efficiency of the synthesized catalyst was not substantially reduced after four cycles.
Conclusion: The current study confirmed that the PMo/UiO-66 system has an appropriate efficiency for photocatalytic removal of amoxicillin under optimized test conditions.
