Volume 3, Issue 2 (6 2010)                   ijhe 2010, 3(2): 185-194 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

AhmadiMoghadam M, Amiri H. Investigation of TOC Removal from IndustrialWastewaters using Electrocoagulation Process. ijhe. 2010; 3 (2) :185-194
URL: http://ijhe.tums.ac.ir/article-1-124-en.html
Abstract:   (8904 Views)

Backgrounds and Objectives: Formaldehyde and phenol are key precursors in the industrial manufacture of resins. Toxicity of these compounds prevents function of microbial populations, so they affect the biological treatments. The aim of this study was investigation of TOC removal from phenol-formaldehyde resin manufacturing wastewater by electrocoagulation using Al- electrodes.
Materials and Methods: This study is the laboratory scale experiment was conducted as a pilot. Wastewater sample was adjusted in the desired pH, electrical conductivity and current density, then it was placed in to the reactor contains four electrodes in aluminum. The electrodes were connected to a DC power supply (0-40V, 0-3A). Samples were collected for TOC determination in the middle of cell at regular time intervals. Collected samples were analyzed using TOC analyzer.
Results:The results indicated that the optimum conditions for the removal of TOC were current density 75 A/m2, solution pH 4 and Conductivity 3 mS/cm. In this condition energy consumption was found 22.5 kWh m-3 after 60 min reaction.
Conclusion: This study shows that electrocoagulation of wastewater from phenol-formaldehyde resin manufacturing can be used as a pretreatment process.

Full-Text [PDF 679 kb]   (2843 Downloads)    
Type of Study: Research | Subject: General
Received: 2010/01/13 | Accepted: 2010/04/7 | Published: 2013/07/7

Add your comments about this article : Your username or Email:

© 2020 All Rights Reserved | Iranian Journal of Health and Environment

Designed & Developed by : Yektaweb