Application of Fenton-like process using iron nano oxides for pyrene removal from contaminated soils

Jorfi, S.; Rezaee, A.; Jaafarzadeh Haghighifard, N.; Moheb-ali, G.A

Volume 7, Issue 3 (5-2014) ijhe 2014, 7(3): 301-314 | Back to browse issues page

Mendeley

Zotero

RefWorks

Jorfi S, Rezaee A, Jaafarzadeh Haghighifard N, Moheb-ali G. Application of Fenton-like process using iron nano oxides for pyrene removal from contaminated soils. ijhe 2014; 7 (3) :301-314
URL: http://ijhe.tums.ac.ir/article-1-5457-en.html

Application of Fenton-like process using iron nano oxides for pyrene removal from contaminated soils

S. Jorfi¹

, A. Rezaee ^*

², N. Jaafarzadeh Haghighifard³

, G.A Moheb-ali⁴

1- Assistant Prof. Environmental Technologies Research Center, Jundishapur University of Medical Sciences, Ahvaz, Iran, Department of Environmental Health Engineering, Jundishapur University of Medical Sciences, Ahvaz, Iran
2- Department of Environmental Health, Faculty of Medical Sciences, Tarbiat Modares University, Tehran, Iran , rezaee@modares.ac.ir
3- Prof. Environmental Technologies Research Center, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran
4- Biotechnology Research Center, Research Institute of Petroleum Industry, Tehran, Iran

Abstract: (8008 Views)

Background and objectives: Because of problems dealing with bioremediation including being time consuming, low efficiency and toxicity to biota, application of advanced oxidation processes with higher efficiency and shorter remediation time have been considered for removal of hydrophobic hydrocarbons from contaminated soils. A great interest has been directed to Fenton oxidation because of its simplicity and high oxidation potential. The objective of this study was to determine the Fenton-like oxidation efficiency for pyrene removal from soil using iron nano oxides and Fe²⁺. Material and Methods: The H₂O₂/Fe molar ratios of unadjusted with native Fe content of soil, 10, and 20 H2O2 concentrations of 0 – 500 mM pH 3, 5, and 7 and soil samples containing Fe²⁺, native iron and iron nano oxides were investigated for removal of 100 mg/kg pyrene according to Taguchi experimental design. Results: Fe²⁺, H₂O₂/Fe molar ratio of 20, pH 3 and H₂O₂ concentration of 500 mM were determined as optimum conditions. Under optimum conditions, S/N ratio increased to 39.322 and the pyrne removal reached to 86 % for Fe²⁺ and 83 % for Fe³⁺ respectively, after 2 hours of reaction time and pH 3. Conclusion: Fenton oxidation using iron nano oxides under defined optimum conditions and neutral pH, can be a suitable alternative to conventional Fenton for remediation of soils contaminated with pyrene.